| |
FUEL TANK
SPARES
Tank, Petrol Taps, Caps, Fuel Hose & Filters
|
|
|
|
We
stock £1000's of spares for Ural, Cossack, Neval, Uralmoto,
Dnepr, Dnieper,
KMZ, IMZ and IZH, but here are a few of the harder to find
bits and pieces for
KMZ Dnepr K650, K750, MT9, MT10/36, MT11, MT16.
We are always on the hunt for hard to find Russian bike
spares, but if we really can't find them
or when the original part can be improved, we develop and/or
make our own alternative.
Dnepr spares are now very hard to get. Generally the earlier
the spare, the harder it is to find.
We have a reasonable supply of new spares including fuel
taps, fuel caps and knee pads
Please note - we do not deal in used parts, or broken parts.
If we can't get it a part in unused and new condition, we
don't sell it.
|
|
|
| Fuel
Tap - KP15A. Original fitment for Ural 650
M63, M66, M67. Also Dnepr MT9, MT10/36 and MT11. 14mm
male thread twin output. These taps have very weak
threads. When fitting a replacement we advise coating
the threads with a sealer and screwing the tap in
by hand. Applying large forces with a spanner will
snap the treaded part off the tap. |
| Part
- F23004/KP15A |
£34.00 |
|
|
|
Fuel
Tap - KP33. Original fitment to the very
last of the Ural 650s and the first of the Ural
750. The spigot sticking out of the tank is male
and has 20 mm threads. The tap has both left and
right hand threads so as the nut is tightened to
draws the tap up to the tank forming a seal. Sorry
these are no longer made. We are working on an alternative,
and at the moment we have an adaptor to allow other
taps to be used.
|
| Part
- F23004/KP33 |
N/A |
|
|
|
| Fuel
Tap - KP15 Alternative. The KP15 tap is original
fitment for Ural 650 M63, M66, M67. Also Dnepr MT9,
MT10/36 and MT11. It is often impossible to obtain
originals so we offer an alternative. The alternative
has a single outlet so we supply it with a T-piece.
|
| Part
- F23004/KP15T |
£25.00 |
|
|
|
| Fuel
Tap - KP33 Adaptor. The original KP33 tap
is no longer produced and we have none left. This
adaptor allows either F23004/VAC or F23004/ALT to
be fitted to any tank that originally had the KP33
tap. |
| Part
- F23004/Adaptor |
£22.00 |
|
|
|
| Fuel
Tap - Vacuum. Standard fitment to most later
750 Urals. Attached to the tank with two M6 screws.
Opened by vacuum from the carburetors when the engine
is running. Standard fitment with one 8 mm outlet.
|
| Part
- F23004/VAC |
£82.00 |
|
|
|
| Fuel
Tap - Alternative. Direct replacement for
the vacuum tap and attached in the same way. Not opened
by vacuum so you need to remember to turn fuel on
and more importantly off again. Good quality lower
cost alternative to the expensive vacuum tap. Note
this has two 6 mm outlets so if you are converting
from vacuum type tap you will require more fuel hose.
|
| Part
- F23004/ALT |
£30.00 |
|
|
|
| Tank
Cap - Large. Fits most Dnepr (Dnieper) motorbikes
including MT9, MT10/36 and MT11. Also fits Ural M63,
M66, M67 and some later 650/750s. Supplied with seal. |
| Part
- F23002/large |
£22.00 |
|
|
|
| Tank
Screen - Baffle. This fits all Dneprs and
Urals originally fitted with the large tank cap
and acts as a baffle when you brake so the tank
cap leaks a lot less. |
| Part
- F23017 |
£8.00 |
|
|
|
Tank
Cap - Screw Fit. Fit all Urals with the newer
(unleaded) tanks. The originals are locking but we
offer a none locking alternative at a lower price.
Supplied with seal.
|
| Part
- F23002/lock |
£60.00 |
| Part
- F23002/screw |
£25.00 |
|
|
|
| Knee
Rubbers - Dnepr. Standard knee pads to
fit all Dnepr MT series bikes using the squarer
fuel tank. Lots of people have asked us for these
over the years and they have been very hard to find,
but we now have a few new sets in stock. |
| Part
- F23009/D |
£18.00 |
|
|
|
Knee
Rubbers - Ural. Fit all Urals both 650 and
750 with the horizontally split tanks. .
Price is per set of two. One left side and one right
side. |
| Part
- F23009 |
£52.00 |
|
|
|
Tank
band - Ural. Rubber band that runs horizontally
round the Ural tank. At first this seems nearly
impossible to fit. This is how it is done. Push
the end through the cleat stop at the front of the
tank on both sides, fit cleats and pull the band
so the cleats grip the end hard. Go to the back
of the tank and pull the band over the seam. It
helps is the band is warm.
Sold with two new cleats |
| Part
- F23010/set |
£36.00 |
|
|
|
| Fuel
Pipe - Connector. If you have ever removed
the fuel tank from a Dnepr or Ural you will know how
frustrating the balance pipe is. The tank needs to
be completely drained and then there is still fuel
left in the pipe. This clever connector fits in the
balance pipe and when it is pulled apart to remove
the tank both sides seal. The picture is white, but
we now have them in black. |
| Part
- F23013/conn |
£16.00 |
|
|
|
| Fuel
Filter - Chrome. Screw together high quality
in line fuel filter with bronze micro-porous filter,
can be cleaned and re-used. keeps your carbs clean. |
| Part
- F23013/fil |
£8.00 |
|
|
|
| Fuel
Cap - Ural Fuel Can. The original fuel can
fitted to the Ural Dalesman Gear-up as standard and
often sold as an optional extra for the Ural Dalesman
have a plastic screw on cap. I've seen a few with
the cap missing and the factory has always claimed
the cap can not be supplied as a separate item. As
you can see from the picture we have managed to get
some. |
| Part
- F24649 |
£12.00 |
|
|
|
Tank
badge - Plastic. Chrome plastic URAL badge.
No where near the same quality as the metal badges,
but good at the price. Great for workshop tool boxes,
panniers, trailers, etc. Self adhesive backing.
Size approximately 110 mm x 27 mm.
Sold and priced per pair. |
| Part
- F25204/plastic |
£10.00 |
|
|
|
Tank
Badge - Round Metal . Polished chrome badges
with 3M adhesive backing to fit Ural. These just have
the Ural "IMZ" factory logo and do not have the the
word Ural on them.
Sold and priced per pair. |
| Part
- F25204/round |
£50.00 |
|
|
|
Tank
badges - Chrome. Polished chrome badges
with 3M adhesive backing to fit Ural fuel tank.
Sold and priced per pair. |
| Part
- F25204/chrome |
£50.00 |
|
|
|
| Petrol
Tank Sealer. The best tank sealer we have
ever used. Three part system to clean, prepare and
line the tank. E10, petrol and ethanol proof. Treats
metal tanks, even if they are rusted through with
pin holes. Not for fibre glass or plastic tanks. One
kit treats up to 22 litre tank capacity. |
| Part
- F23001/seal |
£59.00 |
|
|
|
| Viton
Fuel Pipe. Genuine Viton, flexible fuel
pipe. This is the only fuel pipe that is 100% petrol,
diesel, ethanol and E10 proof. We now have this
in two bore sizes 5.5 mm and 7.3 mm. Please specify
when ordering. We supply this in both 50 cm and
100 cm lengths. |
| Part
- F23013/50cm |
£12.00 |
| Part
- F23013/100cm |
£22.00 |
|
|
|
UK
Delivery Charges - From £6.00
Prices are per delivery not per item.
Mixed orders of many parts will normally be charged
as one large item even if it arrives in several small
boxes.
|
Small
- Items up to about 5 kg for example, gaskets, carburetors,
ignitions, alternators, oil filters.
Delivered to England, Scotland & Wales excluding
Scottish Highlands and Islands
|
£6.00 |
Large
- Items up to 10 kg for
example tyres, mudguards, seats, petrol tanks.
Delivered to England, Scotland & Wales excluding
Scottish Highlands and Islands
|
£10.00 |
Extra
Large -
Items up to 20 kg for example sets of 4 tyres, sets
of 2 mudguards.
Delivered to England, Scotland & Wales excluding
Scottish Highlands and Islands
|
£12.00 |
Highlands
- Sorry there is no small item price for
the highlands so all deliveries up to 10 kg are one
rate.
Delivered to AB30-38, AB44-56, FK17-99, G83, IV1-28,
IV30-32, IV33-39, IV52-54, IV63, KW1-14, PA21-33,
PA34-40, PH18-26, PH30, PH31-41, PH49-50 |
£12.00 |
|
|
|
