We stock a full range of clutch parts for Ural motorcycles.
Many of these parts also fit Dnepr motorcycles.
This site only shows a fraction of our stock so if you don't see what you need please get in contact with us and ask.
Many of these parts also fit Dnepr motorcycles.
This site only shows a fraction of our stock so if you don't see what you need please get in contact with us and ask.
F2 Motorcycles Ltd
290 Leverington Common
Wisbech, Cambridgshire
PE13 5JG
Workshop Open
9.00am - 5.00pm Tues - Sat
Phone 01945 410165
2.00pm - 5.00pm Tues - Sat
VAT Number GB715246743
290 Leverington Common
Wisbech, Cambridgshire
PE13 5JG
Workshop Open
9.00am - 5.00pm Tues - Sat
Phone 01945 410165
2.00pm - 5.00pm Tues - Sat
VAT Number GB715246743
F20801/KIT - Friction Kit
Price - £198.00
Complete friction plate kit with instructions to replace the friction plates in your clutch. Kit includes two high quality friction plates, slot screws, removal studding and instructions. The new plates are slightly thicker so we also include a new slightly longer clutch push rod. Fits all Urals from the 1980s right up to the end of 2012.
If your bike is made from Jan 2013 we can still supply a kit but we need to substitute the screws and remove the pushrod. Please ask for prices at the time of ordering.
F208/KS - Full Clutch
Price - £375.00
Complete clutch for all Ural 650cc kick start models includes very thing you need to change the complete clutch on your 650cc kick start Ural. Kit includes all plate, slot screws, new longer clutch push rod, special studding for removal and our instructions.
If you have an early model M63/M66 or even a side valve 750 please let us know the total length of your original clutch push rod when ordering.
If you have an early model M63/M66 or even a side valve 750 please let us know the total length of your original clutch push rod when ordering.
F208/ES - Full Clutch
Price - £375.00
Complete clutch for all Ural 650 and 750cc electric start models built before the end of 2012.
Kit includes all plate, slot screws, new longer clutch push rod, special studding for removal and our instructions.
If your bike is made from Jan 2013 we can still supply a kit but we need to substitute the screws and remove the pushrod. Please ask for prices at the time of ordering.
Kit includes all plate, slot screws, new longer clutch push rod, special studding for removal and our instructions.
If your bike is made from Jan 2013 we can still supply a kit but we need to substitute the screws and remove the pushrod. Please ask for prices at the time of ordering.
F20903 - Trust Bearing
Price - £15.00
Clutch thrust bearing upgrade. This could be the best £15.00 you ever spend on your Ural or Dnepr. Eliminates the worn tracks in the clutch push rod that leads to rapid wear. Take a look at our tech tips blog all about the problem and how this solves it.
F20804 - Springs
Price per 6 - £66.00
Price per 6 - £66.00
Over the years both Ural and Dnepr motorcycles have used several different clutch springs. The set we supply is a generic set designed to fit and work with all Ural Motorcycles from M62 right through to the 750cc OHV bikes currently available. Sold in sets of six.
F20806 - Clutch Screws
Price per 6 - £18.00
There are two types and we have both in stock in high grade steel.
Type 1 has a small slotted counter sunk head and a fine pitch thread. These fit all Urals and Dneprs right from the original sidevalve 750 of 1941 right through to about 2012.
Type 2 has a much wider hex drive counter sunk head and coarser threads. These were fazed in during 2012 and all bikes after Jan 2013 should have them.
They are not interchangeable so if you are not sure please check before ordering.
Type 1 has a small slotted counter sunk head and a fine pitch thread. These fit all Urals and Dneprs right from the original sidevalve 750 of 1941 right through to about 2012.
Type 2 has a much wider hex drive counter sunk head and coarser threads. These were fazed in during 2012 and all bikes after Jan 2013 should have them.
They are not interchangeable so if you are not sure please check before ordering.
F20415 - Flywheel pins
Price per 6 - £54.00
Flywheel pins for Urals from the 1980s up to about 1999. All kickstart models and the very first few electric start models had these pins pressed into the flywheel. If they wear badly and end up with a narrowed section your new clutch will not release smoothly. Total length is 44mm with internal thread of M8 x 1.00 pitch. These are genuine Ural factory items and therefore hardened. Don't even waste your time with the non hardened pattern parts.
This site uses Google Analytics
© F2 Motorcycles Ltd.
© F2 Motorcycles Ltd.